Pressure Washing in Fulshear, TX
Fulshear's humidity is great for lawns and terrible for concrete. Months of warm, damp air grow black mildew and green algae on shaded driveways, sidewalks, pool decks and the north sides of houses, and the yellow-green pollen that coats everything each spring settles into the concrete and siding. Rust stains from sprinklers and fertilizer, tire marks on driveways and oil spots in front of the garage add to the mess. In the HOA communities around town, a stained driveway or a mildewed fence can bring a courtesy letter, and before a sale or an inspection, clean concrete and siding make a big difference in how a house looks.
We match the method to the surface. Concrete driveways, walks and patios get high-pressure cleaning with a surface cleaner for even results without stripes. Siding, brick, stucco, fences and painted surfaces get a gentler soft wash with cleaners that kill mildew and algae at the root, followed by a low-pressure rinse, so we don't etch, gouge or force water behind siding. We pre-treat oil and rust stains, protect plants, windows and outdoor lights, and rinse down walls and beds afterward. When we're done, the surfaces look fresh, and the mildew takes longer to come back. We use water carefully, avoid blasting soil out of expansion joints, and keep runoff out of storm drains as much as practical.
What this covers
- Driveways and sidewalks
- Patios and pool decks
- Siding, brick and stucco soft washing
- Wood and vinyl fences
- Mildew and algae treatment
- Rust, oil and fertilizer stain pre-treatment
- Outdoor furniture and play sets
- Plant protection and cleanup
How a pressure washing visit usually goes
Walk and Plan
We look at each surface, note stains, cracked joints, loose pavers and delicate areas, and pick the right pressure and cleaner for each one.
Protect and Pre-treat
We cover outlets, lights and door sweeps, wet down plants and beds, and pre-treat mildew, rust and oil stains so they lift instead of smearing.
Wash
We clean concrete with a rotary surface cleaner for an even, stripe-free finish, and soft wash siding, brick, stucco, fences and painted surfaces.
Rinse and Finish
We rinse walls, beds, windows and walks, check for missed spots in good light and leave the area clean and the hoses coiled.
Spring pollen is a big reason Fulshear homeowners call us. When the live oaks bloom each spring, they coat driveways, patios, cars and siding with a yellow-green film that can stain light concrete if it sits through a few rains. Cleaning after the pollen season, usually in late April or May, gives you a fresh start heading into summer. Fall is another good time, after the summer storms and before the holidays. For homes in HOA communities, a cleaning before the annual inspection can help keep you clear of violation notices.
What shapes the price in Fulshear
Pressure washing cost depends on how much area is being cleaned, what the surfaces are and how much buildup there is. A standard two-car driveway and front walk is the simplest job. Adding the back patio, a pool deck, the fence line and a full soft wash of the house increases the time and the amount of cleaning solution needed. Heavy black mildew under trees, old rust or oil stains, and two-story siding take more work, and delicate surfaces like painted wood, older brick and stained cedar need lower pressure and more care. Bundling the driveway, walks, patio and fence into one visit is the most economical approach, and it means the whole property looks consistent when we're done instead of one bright driveway next to a gray fence.
Neighbors often ask
Will pressure washing damage my siding or fence?
Not when it's done right. High pressure can etch wood, gouge soft surfaces and drive water behind siding, so we use soft washing for siding, brick, stucco and painted surfaces, and lower pressure with a wide tip for wood fences. Concrete is the only surface that gets full pressure, and even then we use a surface cleaner to avoid stripes.
How long will my driveway stay clean?
In Fulshear's humid climate, shaded concrete can start to darken again within a year, while sunny areas stay clean longer. Treating mildew at the root, not just blasting the surface, slows regrowth. Many owners have their driveway and walks cleaned once a year, often in spring after the pollen falls, and siding every year or two.
Can you remove rust stains from my driveway?
Often, yes. Rust stains from well water in sprinklers, fertilizer pellets or metal furniture usually respond to a rust-specific cleaner before pressure washing. Some old or deep stains may lighten rather than disappear completely, and we'll tell you what to expect before we start.
Can you clean my fence before I stain it?
Yes, and it makes a real difference. Cleaning a weathered cedar fence before staining removes gray surface fibers, mildew and dirt, so the stain soaks in evenly and lasts longer. We clean at low pressure with a wide fan tip so the wood doesn't fur up, then give it a day or two in the sun to dry before any stain goes on. In HOA communities, we can stain with the approved color once the fence is clean and dry.
Do you clean pool decks?
Yes. Pool decks, especially shaded ones and the cool decking common around newer pools, grow mildew and algae that turn slippery and dark. We clean the deck carefully, angle the spray so debris and cleaning solution stay out of the water, and rinse thoroughly. If the coping or deck joints are cracked or the sealant is failing, we'll point it out so it can be addressed.
Folks pair this with
Drywall Repair
Drywall Repair →TV Mounting
TV Mounting →Furniture Assembly
Furniture Assembly →Door Repair & Adjustment
Door Repair & Adjustment →Pressure Washing around Fulshear
Pressure Washing is one of 14 jobs our Fulshear handyman crew handles, in Fulshear and in nearby communities:
Ready to get your Pressure Washing handled?
Send a photo and a sentence — we'll answer with a real price and a real day on the calendar.